Summary for Test 2017-03-01-1-3
Test performed: ASTM D624-00-re12Project Information
Project Identifiers | Project ID: 7285 DEA: 040120T4 EFIS: 0400000027 |
---|---|
DIST-CO-RTE-PM | 04-SF-80-12.6/13.9 |
Award Date | 11/27/2012 |
Closeout Date | Not set |
Work Description | CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES |
Location Description | THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL |
QA Service Level | 1 (Verified on 10/29/2012) |
Sample Information
Sample Taken Date | 03/01/2017 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/10/2017 |
Sample type | Quality Assurance | A brief description of the sample | Elastomeric Bearing Pad |
The quantity of what the sample constitutes | 1 lot of 66 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Stacey | Last name of sampler or witnessed by | Davis |
Title of sampler | QAI | Telephone number of sampler | 562-480-6984 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Warco Cal Neva | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B362-005-17 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | A20186 |
---|---|---|---|
Material/Compound/Elastomer ID | Neoprene Pad 55 | Samples Representing | 1 lot |
Description (size) | 2" x 6" x 12" | Comments | hole in center |
Description (Number of Shims) | 4 | Type of Bearing Pad | Steel |
Description (Thickness of Shims) | 14 gage | Manufacturer(s) | CSI |
Batch Number | 012617 |
Test Details
DIME Sample ID: 2017-03-01-1
DIME Test ID: 2017-03-01-1-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Test Release Date: 2017-03-24
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Brian
Date of test: 03/13/2017
Humidity: 50 %
Temperature: 72 F
Sample 1 Median Thickness: 0.074 in
Sample 1 Tear Strength: 175.7 lbf / in
Sample 2 Median Thickness: 0.07 in
Sample 2 Tear Strength: 185.7 lbf / in
Sample 3 Median Thickness: 0.076 in
Sample 3 Tear Strength: 223.7 lbf / in
Sample 4 Median Thickness: 0.074 in
Sample 4 Tear Strength: 162.2 lbf / in
Sample 5 Median Thickness: 0.07 in
Sample 5 Tear Strength: 228.6 lbf / in
UTM: no data
Median of the Tear Strength Values: 185.7 lb/in
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Source: Partner Data Point File
Test graph for Sample 4
Source: Partner Data Point File
Test graph for Sample 5
Test was verified on 3/17/2017 ✔