Test 2021-09-27-39-4 (AASHTO T313-19) Summary

Project Information
Project IdentifiersProject ID: 215410
DEA: 060U5204
EFIS: 0616000003
DIST-CO-RTE-PM06-MAD-99-R14.0/R14.5,15.1/19.6
Work DescriptionHMA (TYPE A) AND RHMA (GAP GRADED) RESURFACING.
Location DescriptionMADERA COUNTY IN AND NEAR MADERA FROM 0.2 MILE SOUTH OF AVENUE 17 OVERCROSSING TO 0.3 MILE NORTH OF AVENUE 17 OVERCROSSING AND FROM 1.0 MILE NORTH OF AVENUE 17 OVERCROSSING TO 0.9 MILE NORTH OF AVENUE 20 OVERCROSSING
Sample Information
Sample Taken Date9/27/2021 Sample Unique Key39
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/1/2021
Sample typeAcceptance A brief description of the samplePG70-10
The quantity of what the sample constitutes1 CAN From where was the sample collectedSource
First name of sampler or witnessed byBrandon Last name of sampler or witnessed byVULCAN TECH
Title of samplerVULCAN TECH Laboratory sample identification
The fabricator/manufacturer/facility nameSan Joaquin Refinery Transportation Laboratory (TL) Numberc040241
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAsphalt Binder Performance GradePG 70-10
ModifiedNo Lot number2
Sublot number16 Tank number
Time of sample HMA SupplierVULCAN MADERA
Asphalt Binder SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade Type HMA Design ID
Test Details
DIME Sample ID: 2021-09-27-39
DIME Test ID: 2021-09-27-39-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2021-10-22
Test Results

Input Type: Measured
Tester's full name: Ruben Macias
Date of test: 10/12/2021
Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 983.0 mN
Beam deflection 60.0 s: 0.315 µm
Measured Stiffness Modulus 60.0 s: 252.000 mPa
Estimated Stiffness Modulus 60.0 s: 251.000 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.355
General comments (publicly viewable) (Max 1000 characters): BBR per 2018standard specifications

Test was verified on 10/22/2021