DIME - Test Summary

Summary for Test 2021-10-11-1-1

Test performed: AASHTO T336-15

Project Identifiers	Project ID: 99999 DEA: 0322222
DIST-CO-RTE-PM	03-SAC,OMG-888,99,80-0.6-0.6
Award Date	Not set
Closeout Date	Not set
Work Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
QA Service Level	(Verified on 04/05/2013)

Sample Taken Date	10/11/2021	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/11/2021
Sample type	Quality Assurance	A brief description of the sample	concrete
The quantity of what the sample constitutes	90 Cy	From where was the sample collected	Job Site
First name of sampler or witnessed by	John	Last name of sampler or witnessed by	O'Mara
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	jomara facility	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Concrete	The concrete mix design number	123
The truck number from where the sample was collected		The batch plant ticket number from where the sample was collected	123
Concrete batch plant		The fabricator/manufacturer designation for the sample
A detailed description of where the material sample was collected	Job site	Where the material sample would have been placed if not sampled
From Lot No.		Bag Lot No.

DIME Sample ID: 2021-10-11-1

DIME Test ID: 2021-10-11-1-1

Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory

Test Method: AASHTO T336-15: Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete

Test Release Date: 2021-10-11

Input Type: Measured

Tester's full name: John OMara

Date of test: 10/11/2021

Specimen diameter: 150 mm

Specimen length L₀: 300 mm

Frame Cf: 0 mm/mm/°C

Temperature T₁: 21.111 °C

Temperature T₂: 26.667 °C

Temperature T₃: 32.222 °C

Length L₁: 300 mm

Length L₂: 300.018 mm

Length L₃: 300.036 mm

Aggregate Type: Granite

ΔT₁=T₂-T₁: 5.556 °C

ΔT₂=T₃-T₂: 5.555 °C

ΔL₁=L₂-L₁: 0.018 mm

ΔL₂=L₃-L₂: 0.018 mm

ΔLf₁=Cf*L₀*ΔT₁: 0 mm

ΔLf₂=Cf*L₀*ΔT₂: 0 mm

ΔLa₁=Lm₁+ΔT₁: 0.018 mm

ΔLa₂=Lm₂+ΔT₂: 0.018 mm

CTE₁=ΔLa₁/ΔL₀/ΔT₁: 0.000010799 mm

CTE₂=ΔLa₂/ΔL₀/ΔT₂: 0.000010801 mm

Average CTE: 0.000010800 mm/mm/°C

Average CTE: 0.000006 in/in/°F

General comments (publicly viewable) (Max 1000 characters): DIME Long Term Planning - Testing - Assume rigid frame

Test was verified on 10/11/2021 ✔