DIME - Test Summary

Summary for Test 2021-08-16-29-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215446 DEA: 120S4504 EFIS: 1220000070
DIST-CO-RTE-PM	12-ORA-39-8.5/11.7
Award Date	03/02/2021
Closeout Date	03/01/2022
Work Description	COLD PLANE AC PVMT AND PLACE RHMA
Location Description	ORANGE COUNTY IN WESTMINSTER AND STANTON FROM ROUTE 22/39 SEPARATION TO STARR STREET
QA Service Level	1 (Verified on 02/22/2021)

Sample Taken Date	08/16/2021	Sample Unique Key	29
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/24/2021
Sample type	Verification	A brief description of the sample	PSUE 1/2" RWHMA-G-SP, 0.25% Evotherm
The quantity of what the sample constitutes	2 Bags of Combined Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	RJ Noble Orange	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0495G-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	RJ Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035, 91-33-0039
The fabricator's/manufacturer's product name for the sample	1/2 RWMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	50R003ARSPWEO	A detailed description of where the material sample was collected	Belt Cut at RJ Noble Orange Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-08-16-29

DIME Test ID: 2021-08-16-29-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-09-03

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 08/26/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 965.9 grams

Mass of the pycnometer with water (B): 653.3 grams

Mass of the oven dried sample (before pycnometer) (A): 491.9 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 491.9 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.625

Bulk specific gravity (SSD Basis): 2.668

Apparent specific gravity: 2.743

Absorption: 1.6 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/3/2021 ✔