Test 2021-08-11-1-2 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 214921
DEA: 09367404
EFIS: 0916000025
DIST-CO-RTE-PM09-KER-14-R4.7/R12.6
Work DescriptionCONSTRUCT CRCP OVER EXISTING PAVEMENT AND PLACE HMA.
Location DescriptionKERN COUNTY AT AND NEAR ROSAMOND AND MOJAVE FROM 1.4 MILES SOUTH OF DAWN ROAD OVERCROSSING TO 0.5 MILE NORTH OF SILVER QUEEN ROAD OVERCROSSING
Sample Information
Sample Taken Date8/11/2021 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing8/12/2021
Sample typeVerification A brief description of the samplePSUE 1/2" HMA-A-SP R25, 0.8% Dry Lime
The quantity of what the sample constitutes2 Bags of Virgin Aggregate, 2 Bags of Lime Treated Aggregate, 1 Bag of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byWilliam Last name of sampler or witnessed byLucas
Title of sampler Laboratory sample identification0465A-21
The fabricator/manufacturer/facility nameGranite - Big Rock Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0046
The fabricator's/manufacturer's product name for the sample1/2 HMA-A-SP R25 The fabricator/manufacturer designation for the sample
The plant number1203 A detailed description of where the material sample was collectedBelt Cut at Granite Big Rock Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number4
Sublot number1 JMF Verification ID
Test Details
DIME Sample ID: 2021-08-11-1
DIME Test ID: 2021-08-11-1-2
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-08-24
Test Results

Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 08/14/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 967.7 grams
Mass of the pycnometer with water (B): 653.3 grams
Mass of the oven dried sample (before pycnometer) (A): 496.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 496.4 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.675
Bulk specific gravity (SSD Basis):2.694
Apparent specific gravity:2.727
Absorption:0.7 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 08/24/2021