Summary for Test 2021-05-25-35-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 66666 DEA: APP EFIS: 0019000052 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/25/2021 | Sample Unique Key | 35 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/21/2021 |
Sample type | Aggregate Prequalification Program | A brief description of the sample | 3/8" Manufactured Concrete Aggregate |
The quantity of what the sample constitutes | production stockpile. | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Mike | Last name of sampler or witnessed by | Kocunik |
Title of sampler | Supevisor | Telephone number of sampler | 916-813-9865 |
Laboratory sample identification | 21-APPC-0119 | Linked DIME Sample ID | 2021-05-25-24 |
The fabricator/manufacturer/facility name | Teichert Materials Perkins | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-34-0053::ASPEN VIII AND ASPEN IX |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Production stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | Lot number | ||
Sublot number | HMA Design ID |
Test Details
DIME Sample ID: 2021-05-25-35
DIME Test ID: 2021-05-25-35-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-07-21
Test Results
What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
Input Type: Measured
Tester's full name: Bang Nguyen
Date of test: 06/25/2021
Individual mass retained on the 1/2 in. sieve: 3.7 grams
Individual mass retained on the 3/8 in. sieve: 32.8 grams
Individual mass retained on the #4 sieve: 1117.7 grams
Individual mass retained on the #8 sieve: 99.6 grams
Individual mass retained on the pan: 12.8 grams
Total mass of sample: 1267 grams
Cumulative percent passing the 1/2 in. sieve:100 %
Cumulative percent passing the 3/8 in. sieve:97 %
Cumulative percent passing the #4 sieve:9 %
Cumulative percent passing the #8 sieve:1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/21/2021 ✔