Summary for Test 2021-05-26-16-10

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 215359
DEA: 081K1904
EFIS: 0818000207
DIST-CO-RTE-PM08-SBD-15-16.1/169.4
Award Date02/05/2021
Closeout DateNot set
Work DescriptionREMOVE, PREPARE AND FURNISH POLYESTER CONC OVERLAY & BRIDGE DECK.
Location DescriptionSAN BERNARDINO COUNTY IN AND NEAR HESPERIA AT VARIOUS LOCATIONS FROM CAJON CREEK TO MICRO DITCH.
QA Service Level1 (Verified on 03/30/2021)

Sample Information

Sample Taken Date05/26/2021 Sample Unique Key16
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/27/2021
Sample typeVerification A brief description of the samplePSUE 3/4 " HMA-A-SP R15, 1.0% LSM
The quantity of what the sample constitutes2 Bags Coldfeec Agg., 11 Bags Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byBlue Diamond Victorville Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0311A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameBlue Diamond Materials Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0046, 91-36-0106
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number300154 LSM A detailed description of where the material sample was collectedBelt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Test Details

DIME Sample ID: 2021-05-26-16
DIME Test ID: 2021-05-26-16-10
Testing Lab: CT - Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-06-08

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Input Type: Calculated
Tester's full name: Juan Leroy/Nader Rashidi
Date of test: 06/03/2021
Cumulative percent passing the 3 in. sieve:100 %
Cumulative percent passing the 2 1/2 in. sieve:100 %
Cumulative percent passing the 2 in. sieve:100 %
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:99 %
Cumulative percent passing the 3/4 in. sieve:98 %
Cumulative percent passing the 1/2 in. sieve:87 %
Cumulative percent passing the 3/8 in. sieve:73 %
Cumulative percent passing the #4 sieve:53 %
Cumulative percent passing the #8 sieve:40 %
Cumulative percent passing the #16 sieve:30 %
Cumulative percent passing the #30 sieve:22 %
Cumulative percent passing the #50 sieve:13 %
Cumulative percent passing the #100 sieve:7 %
Cumulative percent passing the #200 sieve:4 %
General comments (publicly viewable) (Max 1000 characters): Combined Lime Treated Aggregate Gradation W/Rap Gradation Correlation Factors

Test was verified on 6/8/2021