Summary for Test 2021-05-12-14-5

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 212914
DEA: 031E0604
EFIS: 0312000068
DIST-CO-RTE-PM03-YUB-70-15.5/16.5
Award Date07/31/2019
Closeout DateNot set
Work DescriptionSIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location DescriptionNEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
QA Service Level1 (Verified on 08/22/2019)

Sample Information

Sample Taken Date05/12/2021 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/14/2021
Sample typeAcceptance A brief description of the sampleAsphalt Binder
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedSupplier
First name of sampler or witnessed byNOT Last name of sampler or witnessed byPROVIDED
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Hallwood Transportation Laboratory (TL) NumberC741868
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number1
Sublot number1 Tank number
Time of sample HMA SupplierTeichert Hollwood
Asphalt Binder SupplierPacific Northwest Oil - Stockton CA MultigradeNo
Multigrade TypeNot set HMA Design ID

Test Details

DIME Sample ID: 2021-05-12-14
DIME Test ID: 2021-05-12-14-5
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-06-01

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Harish Thakur
Date of test: 05/26/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.363 kPa
Phase Angle (δ) (for the 10 cycles): 83.3 degree
Complex Modulus (G*) (for the 10 measurements): 3.627 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 3.65 kPa
General comments (publicly viewable) (Max 1000 characters): RTFOper 2018 standard specs

Test was verified on 6/1/2021