Test 2021-05-13-22-2 (AASHTO T315-16) Summary

Project Information
Project IdentifiersProject ID: 212496
DEA: 024E4504
EFIS: 0200020286
DIST-CO-RTE-PM02-LAS,MOD-139,299-VAR
Work DescriptionPLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location DescriptionLASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
Sample Information
Sample Taken Date5/13/2021 Sample Unique Key22
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing5/21/2021
Sample typeAcceptance A brief description of the samplePG58-34M
The quantity of what the sample constitutes1 of 2 cans From where was the sample collectedManufacturer
First name of sampler or witnessed byE Last name of sampler or witnessed byChavez
Title of sampler Laboratory sample identification
The fabricator/manufacturer/facility nameHat Creek - Shaw Pit Facility Transportation Laboratory (TL) Numberc765847
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA SupplierHat Creek - Shaw
Asphalt Binder SupplierAlbina Asphalt - Klamath Falls Plant - Klamath Falls OR MultigradeNo
Multigrade TypeNot set HMA Design ID
Test Details
DIME Sample ID: 2021-05-13-22
DIME Test ID: 2021-05-13-22-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-05-28
Test Results

Phase: Original binder
Input Type: Measured
Tester's full name: Harish Thakur
Date of test: 05/25/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.195 kPa
Phase Angle (δ) (for the 10 cycles): 66.8 degree
Complex Modulus (G*) (for the 10 measurements): 1.626 kPa
Test Temperature: 58.0 C
Dynamic Shear, G*/sin(δ): 1.77 kPa
General comments (publicly viewable) (Max 1000 characters): OriginalPer 2018 Standard Specifications

Test was verified on 05/28/2021