Summary for Test 2021-05-07-6-9

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 215193
DEA: 07318804
EFIS: 0716000001
DIST-CO-RTE-PM07-LA-605-23.4/23.6
Award Date12/11/2020
Closeout Date03/01/2022
Work DescriptionREALIGN RAMP AND REPLACE GUARDRAIL WITH CONCRETE BARRIER.
Location DescriptionLOS ANGELES COUNTY IN IRWINDALE FROM 0.1 MILE NORTH OF GRAHAM ACCESS ROAD OVERCROSSING TO 0.1 MILE NORTH OF LIVE OAK AVENUE OVERCROSSING
QA Service Level1 (Verified on 02/26/2021)

Sample Information

Sample Taken Date05/07/2021 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/10/2021
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R15 No LAS
The quantity of what the sample constitutes4 Bags of Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byZaid Last name of sampler or witnessed byAbdelkhaliq
Title of sampler Telephone number of sampler
Laboratory sample identification0270A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number105793 A detailed description of where the material sample was collectedBelt Cut at All American Irwindale Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Test Details

DIME Sample ID: 2021-05-07-6
DIME Test ID: 2021-05-07-6-9
Testing Lab: CT 08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-05-17

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Input Type: Calculated
Tester's full name: Edmond Jabbour
Date of test: 05/12/2021
Cumulative percent passing the 3 in. sieve:100 %
Cumulative percent passing the 2 1/2 in. sieve:100 %
Cumulative percent passing the 2 in. sieve:100 %
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:100 %
Cumulative percent passing the 1/2 in. sieve:100 %
Cumulative percent passing the 3/8 in. sieve:91 %
Cumulative percent passing the #4 sieve:66 %
Cumulative percent passing the #8 sieve:47 %
Cumulative percent passing the #16 sieve:36 %
Cumulative percent passing the #30 sieve:27 %
Cumulative percent passing the #50 sieve:19 %
Cumulative percent passing the #100 sieve:13 %
Cumulative percent passing the #200 sieve:9 %
General comments (publicly viewable) (Max 1000 characters): Rap Gradation After Ignition

Test was verified on 5/17/2021