Print Report | Back to Test Summary

Testing Report for 2019-11-25-37-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081E4604
EFIS: 0814000026
Project ID: 213638
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-37.7/44.7
Work Description: CONSTRUCT RAISED MEDIAN CURBS AND LEFT TURNS, AND WIDEN SHOULDERS.
Location Description: RIVERSIDE COUNTY IN AND NEAR HEMET FROM 0.1 MILE WEST OF WEST ACACIA AVENUE TO RAMONA EXPRESSWAY
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Nick Truong
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-11-25-37
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 11/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/27/2019
The quantity of what the sample constitutes: PSUE 4 Bags
A brief description of the sample: 3/4 HMA-A-SP R15
From where was the sample collected: Manufacturer
Laboratory sample identification: 0707-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Corona, Pacific Clay Products

Material Information

Source Identification (SMARA or name of Pit): 91-33-0027, 91-33-0073
The fabricator's/manufacturer's product name for the sample: 3/4 HMA-A-SP R15
The fabricator/manufacturer designation for the sample: 224112 CORD MPC
The plant number: Unknown
A detailed description of where the material sample was collected: Belt Cut at Vulcan Corona Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2019-11-25-37-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 12/12/2019
Verified Date: 5/7/2020
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test: Virgin Aggregate Gradation
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99 %
Cumulative percent passing the 1/2 in. sieve: 86 %
Cumulative percent passing the 3/8 in. sieve: 74 %
Cumulative percent passing the 1/4 in. sieve: 58 %
Cumulative percent passing the #4 sieve: 50 %
Cumulative percent passing the #8 sieve: 36 %
Cumulative percent passing the #16 sieve: 25 %
Cumulative percent passing the #30 sieve: 16 %
Cumulative percent passing the #50 sieve: 10 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 4.7 %