Summary for Test 2020-10-28-13-3
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 213568 DEA: 034H6904 EFIS: 0319000026 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4 |
| Award Date | 08/13/2018 |
| Closeout Date | 08/28/2023 |
| Work Description | Major Damage Restoration (Emergency Opening) |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 08/24/2018) |
Sample Information
| Sample Taken Date | 10/28/2020 | Sample Unique Key | 13 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/29/2020 | Sample type | Quality Assurance |
| A brief description of the sample | Hydrolite-Trinity Lightweight | The quantity of what the sample constitutes | 3-5 gallon bucket |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | not available |
| Last name of sampler or witnessed by | not available | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 20-PCCC-0217 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | na | |
| Transportation Laboratory (TL) Number | na | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | na |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | at job site | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-10-28-13
DIME Test ID: 2020-10-28-13-3
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2020-12-07
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: RK/JH
Date of test: 11/17/2020
Percentage of 2 ½ x 1 ½ material loss: 0 %
Percentage of 1 ½ x ¾ inch material loss: 0 %
Percentage of ¾ x ⅜ inch material loss: 34.54 %
Percentage of ⅜ inch x No. 4 material loss: 11.92 %
Coarse weighted average loss: 15 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/7/2020 ✔