Summary for Test 2015-02-26-4-1
Test performed: ASTM C39-10Project Information
| Project Identifiers | Project ID: 7531 DEA: 042908C4 EFIS: 0400021248 COOP: 042397A3 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-580-R8.4/R14.6 |
| Award Date | 11/20/2012 |
| Closeout Date | 09/30/2016 |
| Work Description | ROADWAY WIDENING AND REHABILITATION. |
| Location Description | ALAMEDA COUNTY IN LIVERMORE FROM 0.1 MILE WEST OF GREENVILLE ROAD UNDERCROSSING TO 0.5 MILE WEST OF 84/580 SEPARATION |
| QA Service Level | 1 (Verified on 09/24/2012) |
Sample Information
| Sample Taken Date | 02/26/2015 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/06/2015 |
| Sample type | Verification | A brief description of the sample | concrete cylinders |
| The quantity of what the sample constitutes | 2 concrete cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | m | Last name of sampler or witnessed by | Bruce |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Unknown | Transportation Laboratory (TL) Number | 191290 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Unknown |
| Structure name | Unknown |
Material Information
| Material Type | Concrete | The concrete mix design number | 1557036 |
|---|---|---|---|
| The truck number from where the sample was collected | Unknown | The batch plant ticket number from where the sample was collected | Unknown |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | Truck | Where the material sample would have been placed if not sampled | Not set |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-02-26-4
DIME Test ID: 2015-02-26-4-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2015-03-26
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Mullins
Date of test: 03/26/2015
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.02 in
Average diameter of cylinder 2: 6.02 in
Maximum load on cylinder 1: 164836 lb
Maximum load on cylinder 2: 158595 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: no data
Age of specimen: 28 days
Cross sectional area of cylinder 1: 28.46 in^2
Cross sectional area of cylinder 2: 28.46 in^2
Compressive strength of cylinder 1: 5791.8 psi
Compressive strength of cylinder 2: 5572.6 psi
Compressive strength (to nearest 10 psi): 5680 psi
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Cylinder Code 1 of 2
Source: Partner Data Point File
Test graph for Cylinder Code 2 of 2
Test was verified on 3/26/2015 ✔