Summary for Test 2020-10-29-7-1
Test performed: CTM 673-July 2012Project Information
| Project Identifiers | Project ID: 213444 DEA: 060Q2804 EFIS: 0613000051 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-99,178-23.8/R28.4,0.1 |
| Award Date | 10/03/2018 |
| Closeout Date | 05/11/2023 |
| Work Description | RECONSTRUCT LANES AND SHOULDERS WITH CRCP, MODIFYING ELECTRICAL SYSTEM |
| Location Description | KERN COUNTY IN BAKERSFIELD ON ROUTE 99 FROM 0.3 MILE SOUTH OF PALM AVENUE OVERCROSSING TO BEARDSLEY CANAL BRIDGE AND ON ROUTE 178 AT ROUTE 99/178 SEPARATION |
| QA Service Level | 1 (Verified on 12/13/2018) |
Sample Information
| Sample Taken Date | 10/29/2020 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/03/2020 |
| Sample type | Quality Assurance | A brief description of the sample | joint seal |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 1020393 |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman | Temperature | 72 |
| Humidity | 50 | Comments | |
| Joint Seal Size | 2.75" |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-10-29-7
DIME Test ID: 2020-10-29-7-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2020-11-09
Test Results
Input Type: Calculated
Tester's full name: Steven Paine
Date of test: 11/04/2020
UTM: 2KIP
Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 2.88 in
Area (5 Times of the Height of Contact Face): 14.3325 sqin
Half of the Spec Minimum Uncompressed Width: 0 in
85 Percent of the Spec Minimum Uncompressed Width: 2.8665 in
3 Times of the Area: 0 sqin
4 Times of the Load at W1: 0 lbs
W1 (US Units): 2.45 in
W1 (Metric Units): 62.18 millimeters
W2 (US Units): 1.22 in
W2 (Metric Units): 31.05 millimeters
Satisfactory of MR of (US Units): 1.2256 in
Satisfactory of MR of (Metric Units): 31.13 millimeters
Optional W1 Measurement 1: 0 in
Optional W1 Measurement 2: 0 sqin
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/9/2020 ✔