DIME - Test Summary

Summary for Test 2020-10-14-15-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214775 DEA: 081F13U4 EFIS: 0819000074
DIST-CO-RTE-PM	08-SBD-62,95-122.0/142.7,9.7/33.6
Award Date	05/04/2020
Closeout Date	06/30/2021
Work Description	COLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location Description	SAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
QA Service Level	1 (Verified on 08/14/2020)

Sample Taken Date	10/14/2020	Sample Unique Key	15
Date that the sample was received by the laboratory/organization performing the testing	10/16/2020	Sample type	Verification
A brief description of the sample	10K MS 3/4" RHMA-G-SP 1.0% Lime Slurry	The quantity of what the sample constitutes	5 Bags Agg., 2 Bags of Coldfeed agg.
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Matthew
Last name of sampler or witnessed by	McLuckie	Title of sampler
Telephone number of sampler		Laboratory sample identification	0608G-20
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Granite Construction Company Indio
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0072
The fabricator's/manufacturer's product name for the sample	3/4 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	1557	A detailed description of where the material sample was collected	Belt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-10-14-15

DIME Test ID: 2020-10-14-15-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-10-26

Input Type: Measured

Tester's full name: Michael Magana

Date of test: 10/20/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	974.7 grams
Mass of the pycnometer with water (B)	663.7 grams
Mass of the oven dried sample (before pycnometer) (A)	496.0 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	496.0 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.624
Bulk specific gravity (SSD Basis)	2.646
Apparent specific gravity	2.681
Absorption	0.8 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/26/2020 ✔