Summary for Test 2020-09-24-14-4

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 213469
DEA: 024C40V4
EFIS: 0218000125
DIST-CO-RTE-PM02-SHA-5-R3.8/R11.7
Award Date11/06/2018
Closeout Date08/16/2023
Work DescriptionWIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location DescriptionSHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
QA Service Level1 (Verified on 12/31/2018)

Sample Information

Sample Taken Date09/24/2020 Sample Unique Key14
Date that the sample was received by the laboratory/organization performing the testing10/02/2020 Sample typeDepartment Acceptance
A brief description of the sampleAsphalt Binder Sample #1 Test, #2 (853468) No test The quantity of what the sample constitutes1 Can
From where was the sample collectedDistributor First name of sampler or witnessed byC
Last name of sampler or witnessed byBryant Title of samplerTET
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameValero - Benicia
Transportation Laboratory (TL) Number037254 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-22
ModifiedNo Lot number
Sublot number Tank numberNot set
Time of sampleNot set HMA SupplierNot set
Certified Asphalt SupplierNot set MultigradeNot set
Multigrade TypeNot set Asphalt Binder Mix NumberNot set
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2020-09-24-14
DIME Test ID: 2020-09-24-14-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2020-10-06

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Doug Ruff
Date of test: 10/06/2020
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.805 kPa
Phase Angle (δ) (for the 10 cycles): 79.5 degree
Complex Modulus (G*) (for the 10 measurements): 8.045 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 8.18 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 standard specifications

Test was verified on 10/6/2020 ✔