DIME - Test Summary

Summary for Test 2020-06-10-42-9

Test performed: AASHTO T304-11

Project Identifiers	Project ID: 214685 DEA: 024E46U4 EFIS: 0216000122
DIST-CO-RTE-PM	02-LAS-36-6.0/14.6
Award Date	05/08/2020
Closeout Date	08/14/2023
Work Description	REPLACE BRIDGE, ROADWAY EXCAVATION, HMA, CLASS 2 AB AND DRAINAGE WORK.
Location Description	LASSEN COUNTY NEAR WESTWOOD FROM 1.3 MILES WEST OF GOODRICH CREEK BRIDGE TO 1.0 MILE WEST OF WILLARD CREEK ROAD
QA Service Level	1 (Verified on 03/02/2020)

Sample Taken Date	06/10/2020	Sample Unique Key	42
Date that the sample was received by the laboratory/organization performing the testing	06/11/2020	Sample type	Verification
A brief description of the sample	3/4-inch Type A Untreated Virgin Aggregate	The quantity of what the sample constitutes	JMF Verification
From where was the sample collected	Source	First name of sampler or witnessed by	CGI
Last name of sampler or witnessed by	CGI	Title of sampler
Telephone number of sampler		Laboratory sample identification	D78468F
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Ward Lake Pit
Transportation Laboratory (TL) Number	896983	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-18-0008
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	JMF 20-08-S1	Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-06-10-42

DIME Test ID: 2020-06-10-42-9

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)

Test Release Date: 2020-09-10

What test method is performed?: Method A

Input Type: Measured

Tester's full name: Terry McCormick

Date of test: 09/05/2020

Mass of measure: 190.2 grams

Bulk dry specific gravity: 2.614

Mass of sample and measure #1: 328.5 grams

Mass of sample and measure #2: 328.3 grams

Volume of cylinder: 100.0 mL

Mass of sample #1: 138.3 grams

Mass of sample #2: 138.1 grams

Uncompacted voids #1: 47.1 %

Uncompacted voids #2: 47.2 %

Average uncompacted voids: 47.2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/10/2020 ✔