DIME - Test Summary

Summary for Test 2020-06-04-31-8

Test performed: AASHTO T304-11

Project Identifiers	Project ID: 214571 DEA: 020J1104 EFIS: 0219000062
DIST-CO-RTE-PM	02-PLU-70-33.1/42.1
Award Date	02/07/2020
Closeout Date	04/27/2021
Work Description	PLACE HMA & SHOULDER BACKING, & REMOVE & REPLACE PAVEMENT DELINEATION.
Location Description	PLUMAS COUNTY AT AND NEAR KEDDIE FROM INDIAN CREEK BRIDGE TO 0.3 MILE WEST OF SPANISH CREEK BRIDGE NO. 09-0018
QA Service Level	1 (Verified on 01/22/2020)

Sample Taken Date	06/04/2020	Sample Unique Key	31
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/05/2020
Sample type	Verification	A brief description of the sample	3/4-inch Untreated Virgin Type A Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Source
First name of sampler or witnessed by	PEI	Last name of sampler or witnessed by	PEI
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78458F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Sierra Cascade Aggregate and Asphalt Products	Transportation Laboratory (TL) Number	733199
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-32-0002
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	JMF 20-07-S1	Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-06-04-31

DIME Test ID: 2020-06-04-31-8

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)

Test Release Date: 2020-08-20

What test method is performed?: Method A

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 08/17/2020

Mass of measure: 190.1 grams

Bulk dry specific gravity: 2.562

Mass of sample and measure #1: 324.0 grams

Mass of sample and measure #2: 324.4 grams

Volume of cylinder: 100.0 mL

Mass of sample #1: 133.9 grams

Mass of sample #2: 134.3 grams

Uncompacted voids #1: 47.7 %

Uncompacted voids #2: 47.6 %

Average uncompacted voids: 47.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/20/2020 ✔