Summary for Test 2020-07-24-34-2
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 214289 EFIS: 0000001157 Permit Numbers: 0514NMC0478 0519NRT0383 0519NRT0001 0519NRD0572 |
|---|---|
| DIST-CO-RTE-PM | 05---6.9 |
| Award Date | 01/05/2018 |
| Closeout Date | 08/23/2021 |
| Work Description | Reference Permit #0514-NMC-0478 on all correspondence. Note #0519-NRT-0383 is just a time extension for the original permit. Work Desc: Widen Blosser Road to provide a right turn lane for the northbound approach to West Main Street (State Route 166). |
| Location Description | W. Main Street (Hwy 166), Santa Maria |
| QA Service Level | 1 (Verified on 08/07/2019) |
Sample Information
| Sample Taken Date | 07/24/2020 | Sample Unique Key | 34 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/24/2020 | Sample type | Verification |
| A brief description of the sample | RAP for 1/2" HMA | The quantity of what the sample constitutes | 1 bag |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Syd |
| Last name of sampler or witnessed by | Valeh | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Dutra | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | San Rafael Quarry |
|---|---|---|---|
| Aggregate Size | Aggregate Source | ||
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-07-24-34
DIME Test ID: 2020-07-24-34-2
Testing Lab: CT D04 - Hayward DME / District Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2020-08-11
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Reza Dineli
Date of test: 08/04/2020
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1434.6 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 7.7 grams | 99.5 % | |||||
| 25.8 grams | 98.2 % | |||||
| 247.3 grams | 82.8 % | |||||
| 495.4 grams | 65.5 % | |||||
| 706.5 grams | 50.8 % | |||||
| 883.0 grams | 38.4 % | |||||
| 1040.6 grams | 27.5 % | |||||
| 1189.9 grams | 17.1 % | |||||
| 1265.5 grams | 11.8 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/11/2020 ✔