Summary for Test 2020-05-21-33-2
Test performed: AASHTO T104-99r16Project Information
Project Identifiers | Project ID: 214725 DEA: 020J1304 EFIS: 0219000064 |
---|---|
DIST-CO-RTE-PM | 02-LAS-139-43.0/53.0 |
Award Date | 04/10/2020 |
Closeout Date | 10/06/2020 |
Work Description | COLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A). |
Location Description | LASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD |
QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
Sample Taken Date | 05/21/2020 | Sample Unique Key | 33 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/22/2020 |
Sample type | Verification | A brief description of the sample | Crusher Dust Untreated Sized Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification Renewal | From where was the sample collected | Source |
First name of sampler or witnessed by | Jimmy | Last name of sampler or witnessed by | Montana |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78440D | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shaw Pit | Transportation Laboratory (TL) Number | 733194 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Untreated Sized Aggregate Stockpile |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/4 inch |
The concrete mix design number | JMF 19-05-R1 | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-05-21-33
DIME Test ID: 2020-05-21-33-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2020-08-05
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Bang Nguyen
Date of test: 08/05/2020
Percentage of ⅜ inch x No. 4 material loss: 25.2 %
Percentage of No. 4 x 8 material loss: 4.6 %
Percentage of No. 8 x 16 material loss: 4.2 %
Percentage of No. 16 x 30 material loss: 5.69 %
Percentage of No. 30 x 50 material loss: 10.69 %
Fine weighted average loss: 7.4 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/5/2020 ✔