Summary for Test 2020-07-22-3-3
Test performed: ASME B1.2-83r01Project Information
| Project Identifiers | Project ID: 77777 DEA: CHEM-STOCK EFIS: CHEM-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for Chem Lab stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 07/22/2020 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/27/2020 | Sample type | Stock |
| A brief description of the sample | A449 HDG bolt | The quantity of what the sample constitutes | 593 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Craig |
| Last name of sampler or witnessed by | Hager | Title of sampler | |
| Telephone number of sampler | 925-899-1184 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | UIS | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | B29-019-20 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 201344 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | ASTM A449 |
| Bolt Length(s) | 17.5 in. | Nut Specification | N/A |
| Washer Specification | N/A | Finish | HDG |
| Diameter/Size | 7/8 | Bolt Mfg. Lot Number | 32943 |
| Rocap Test Requirement(s) | None | Lubricant Requirements(s) | None |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-07-22-3
DIME Test ID: 2020-07-22-3-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Test Release Date: 2020-08-03
Test Results
Input Type: Calculated
Tester's full name: Steven Paine
Date of test: 08/03/2020
Sample No.: 1A
Rocap Number: no data
Heat Number(s): 201344
Mfg. Lot Number: no data
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: A449 01AE
Size: .875 in
Bolt Length: 17.5 in
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/3/2020 ✔