Summary for Test 2020-06-02-29-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 214513
DEA: 021H3904
EFIS: 0216000041
DIST-CO-RTE-PM02-SHA-5-R32.0/R32.3
Award Date01/24/2020
Closeout Date09/28/2021
Work DescriptionO'BRIEN DECK AND RAIL REHAB: WEATHER INFO SYSTEM, STRUCTURAL CONCRETE, HMA, REMOVE BRIDGE BARRIER.
Location DescriptionSHASTA COUNTY ABOUT 10 MILES SOUTH OF LAKEHEAD FROM 0.1 MILE SOUTH TO 0.3 MILE NORTH OF O'BRIEN UNDERCROSSING
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date06/02/2020 Sample Unique Key29
Date that the sample was received by the laboratory/organization performing the testing06/02/2020 Sample typeVerification
A brief description of the sampleCrushed Fines Sized Untreated Aggregate The quantity of what the sample constitutesJMF Verification Renewal
From where was the sample collectedManufacturer First name of sampler or witnessed byAnthony
Last name of sampler or witnessed byOrtiz Title of sampler
Telephone number of sampler Laboratory sample identificationD78453C
Linked DIME Sample ID The fabricator/manufacturer/facility nameNorthstate Asphalt, Redding, CA
Transportation Laboratory (TL) Number036436 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedSized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Sizefine
The concrete mix design numberJMF 19-08-R1 Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-06-02-29
DIME Test ID: 2020-06-02-29-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-07-31

Test Results


What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/04/2020
Cumulative Mass RetainedCumulative Percent Passing
515.8 grams
grams %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0 grams100 %
3.7 grams99.3 %
157.5 grams68.8 %
277.5 grams45.5 %
353.9 grams30.7 %
404.8 grams20.8 %
437.5 grams14.5 %
456.4 grams10.8 %
grams
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/31/2020 ✔