DIME - Test Summary

Summary for Test 2020-06-30-43-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214059 DEA: 042K7504 EFIS: 0417000019
DIST-CO-RTE-PM	04-SCL-152-7.6/M10.2
Award Date	05/24/2019
Closeout Date	04/12/2021
Work Description	ROADWAY REHAB, CURB RAMPS, SIGNALS, AND STRIPING UPGRADES.
Location Description	SANTA CLARA COUNTY IN GILROY FROM 0.3 MILE WEST OF SANTA TERESA BOULEVARD TO ROUTE 101
QA Service Level	1 (Verified on 06/04/2019)

Sample Taken Date	06/30/2020	Sample Unique Key	43
Date that the sample was received by the laboratory/organization performing the testing	08/02/2020	Sample type	Verification
A brief description of the sample	3/8" HMA Aggregate	The quantity of what the sample constitutes	JMF 16 Bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Purvi
Last name of sampler or witnessed by	Shah	Title of sampler
Telephone number of sampler		Laboratory sample identification
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Granite Construction Company
Transportation Laboratory (TL) Number	810423	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-24-0009
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Hot Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/8 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-06-30-43

DIME Test ID: 2020-06-30-43-2

Testing Lab: CT D04 - Hayward DME / District Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-07-31

Input Type: Measured

Tester's full name: Babak Kamranimoghaddam

Date of test: 07/08/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	971.4 grams
Mass of the pycnometer with water (B)	662.2 grams
Mass of the oven dried sample (before pycnometer) (A)	493.2 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	493.2 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.585
Bulk specific gravity (SSD Basis)	2.621
Apparent specific gravity	2.680
Absorption	1.4 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/31/2020 ✔