DIME - Test Summary

Summary for Test 2020-07-08-26-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214630 DEA: 073W7704 EFIS: 0717000100
DIST-CO-RTE-PM	07-LA-60-R25.5/R30.5
Award Date	03/24/2020
Closeout Date	01/28/2021
Work Description	COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE RHMA-G.
Location Description	LOS ANGELES COUNTY IN DIAMOND BAR AND POMONA FROM DIAMOND BAR BOULEVARD UNDERCROSSING TO SAN BERNARDINO COUNTY LINE.
QA Service Level	1 (Verified on 05/20/2020)

Sample Taken Date	07/08/2020	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/17/2020
Sample type	Verification	A brief description of the sample	PSUE 1/2" RMHA-G-SP 0.50% LAS Aggregate
The quantity of what the sample constitutes	3 Bags Coldfeed Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan Irwindale	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0442G-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials - Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample	1/2 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	326120A IRW LTR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Irwindale Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-07-08-26

DIME Test ID: 2020-07-08-26-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-07-23

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 07/21/2020

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 967.7 grams

Mass of the pycnometer with water (B): 655.1 grams

Mass of the oven dried sample (before pycnometer) (A): 486.9 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 486.9 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.598

Bulk specific gravity (SSD Basis): 2.668

Apparent specific gravity: 2.793

Absorption: 2.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/23/2020 ✔