DIME - Test Summary

Summary for Test 2020-06-23-29-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214523 DEA: 07302504 EFIS: 0713000479
DIST-CO-RTE-PM	07-VEN-23-R3.3/R11.5
Award Date	02/06/2020
Closeout Date	12/10/2024
Work Description	PLACE HMA AND JPCP AND INDIVIDUAL SLAB REPLACEMENT.
Location Description	VENTURA COUNTY FROM ROUTE 101/23 SEPARATION TO NEW LOS ANGELES AVENUE UNDERCROSSING
QA Service Level	1 (Verified on 03/17/2020)

Sample Taken Date	06/23/2020	Sample Unique Key	29
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/08/2020
Sample type	Verification	A brief description of the sample	3/4" HMA-A-SP R15 Aggregate and RAP
The quantity of what the sample constitutes	PSUE 12 Bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan Sun Valley	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0412A-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Sun Valley	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0017-, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R15	The fabricator/manufacturer designation for the sample	Unknown
The plant number	220831A SVA LTR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2020-06-23-29

DIME Test ID: 2020-06-23-29-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-07-16

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 07/10/2020

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 969.9 grams

Mass of the pycnometer with water (B): 655.1 grams

Mass of the oven dried sample (before pycnometer) (A): 494.7 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 494.7 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.671

Bulk specific gravity (SSD Basis): 2.700

Apparent specific gravity: 2.750

Absorption: 1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/16/2020 ✔