DIME - Test Summary

Summary for Test 2020-06-23-10-3

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 210837 DEA: 080J0804 EFIS: 0800000283 COOP: 081625
DIST-CO-RTE-PM	08-RIV-15-34.7/51.6
Award Date	04/17/2017
Closeout Date	08/01/2024
Work Description	(Alternative Delivery) DESIGN-BUILD OF THE INTERSTATE 15 EXPRESS LANES PROJECT
Location Description	Riverside County and SBD-15-0.0/1.3
QA Service Level	1 (Verified on 05/08/2017)

Sample Taken Date	06/23/2020	Sample Unique Key	10
Date that the sample was received by the laboratory/organization performing the testing	06/24/2020	Sample type	Verification
A brief description of the sample	3/4 HMA-A-SP R15 Aggreagte and RAP	The quantity of what the sample constitutes	3 Bags Combined Agg. 1 Bag Rap
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	All American Asphalt Corona
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0367A-20
Linked DIME Sample ID		The fabricator/manufacturer/facility name	All American Asphalt - Corona
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R15	The fabricator/manufacturer designation for the sample	Unknown
The plant number	105793	A detailed description of where the material sample was collected	Belt Cut at All American Corona
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2020-06-23-10

DIME Test ID: 2020-06-23-10-3

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-06-30

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 06/26/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	971.4 grams
Mass of the pycnometer with water (B)	655.1 grams
Mass of the oven dried sample (before pycnometer) (A)	492.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	492.6 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.682
Bulk specific gravity (SSD Basis)	2.722
Apparent specific gravity	2.794
Absorption	1.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/30/2020 ✔