Summary for Test 2020-05-29-32-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 213764 DEA: 080F0304 EFIS: 0800020358 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-60-R0.7/R3.0 |
| Award Date | 03/07/2019 |
| Closeout Date | 07/27/2023 |
| Work Description | REMOVE AND REPLACE THREE OVERCROSSING BRIDGES ON ROUTE 60 |
| Location Description | IN SAN BERNARDINO COUNTY IN AND NEAR CHINO AT VARIOUS LOCATIONS FROM O.1 MILE WEST OF PIPELINE AVENUE OVERCROSSING TO 0.1 MILE EAST OF BENSON AVENUE OVERCROSSING |
| QA Service Level | 1 (Verified on 05/01/2019) |
Sample Information
| Sample Taken Date | 05/29/2020 | Sample Unique Key | 32 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/03/2020 | Sample type | Quality Assurance |
| A brief description of the sample | CONCRETE CYLINDERS | The quantity of what the sample constitutes | 25 CY |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | R |
| Last name of sampler or witnessed by | Kim | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 1003-5292 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | ROBERTSONS | |
| Transportation Laboratory (TL) Number | 5292 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | RRM18161 |
|---|---|---|---|
| The truck number from where the sample was collected | 1510 | The batch plant ticket number from where the sample was collected | 542898 |
| Concrete batch plant | ROBERTONS | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | NA | Where the material sample would have been placed if not sampled | STAGE 1 PIPELINE AVE OC ABUTMENT WALLS number 3 |
| From Lot No. | Unknown | Bag Lot No. | Unknown |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-05-29-32
DIME Test ID: 2020-05-29-32-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2020-06-26
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Jose Guzman
Date of test: 05/31/2020
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.01 in
Average diameter of cylinder 2: 6.01 in
Maximum load on cylinder 1: 117115 lb
Maximum load on cylinder 2: 120080 lb
Type of fracture pattern of cylinder 1: 3
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Age of specimen: 2 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 28.37 in^2
Cross sectional area of cylinder 2: 28.37 in^2
Compressive strength of cylinder 1: 4128.1 psi
Compressive strength of cylinder 2: 4232.6 psi
Compressive strength (to nearest 10 psi): 4180 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/26/2020 ✔