Summary for Test 2020-06-03-17-10
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 214523 DEA: 07302504 EFIS: 0713000479 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-23-R3.3/R11.5 |
| Award Date | 02/06/2020 |
| Closeout Date | 12/10/2024 |
| Work Description | PLACE HMA AND JPCP AND INDIVIDUAL SLAB REPLACEMENT. |
| Location Description | VENTURA COUNTY FROM ROUTE 101/23 SEPARATION TO NEW LOS ANGELES AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 03/17/2020) |
Sample Information
| Sample Taken Date | 06/03/2020 | Sample Unique Key | 17 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/15/2020 |
| Sample type | Verification | A brief description of the sample | 3/4" HMA -A-SP R15 0.50%LAS Agg. & Rap |
| The quantity of what the sample constitutes | 10 bags of Agg. & 2 bags of Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Sun Valley | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0337A-20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0017, 91-19-0019, 91-19-0021 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 220831 SVA LTR | A detailed description of where the material sample was collected | Belt Cut From Vulcan Sun Valley |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-06-03-17
DIME Test ID: 2020-06-03-17-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-06-24
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Sebastian Ferrer, Satish Jain
Date of test: 06/16/2020
| Sieve Size | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 99 % | ||||||
| 85 % | ||||||
| 72 % | ||||||
| 47 % | ||||||
| 34 % | ||||||
| 25 % | ||||||
| 19 % | ||||||
| 11 % | ||||||
| 6 % | ||||||
| 3.1 % | ||||||
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied
Test was verified on 6/24/2020 ✔