DIME - Test Summary

Summary for Test 2020-04-20-21-5

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214589 DEA: 020J1604
DIST-CO-RTE-PM	02-PLU-284-0.0/8.3
Award Date	02/11/2020
Closeout Date	10/06/2020
Work Description	PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING).
Location Description	PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072
QA Service Level	1 (Verified on 01/22/2020)

Sample Taken Date	04/20/2020	Sample Unique Key	21
Date that the sample was received by the laboratory/organization performing the testing	04/21/2020	Sample type	Verification
A brief description of the sample	Combined 3/4-inch Type A Untreated Sized Virgin Aggregate	The quantity of what the sample constitutes	JMF Verification
From where was the sample collected	Source	First name of sampler or witnessed by	Jimmy
Last name of sampler or witnessed by	Montana	Title of sampler
Telephone number of sampler		Laboratory sample identification	D78409F
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Ward Lake Pit
Transportation Laboratory (TL) Number	733180	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	JMF 20-03-S1a	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2020-04-20-21

DIME Test ID: 2020-04-20-21-5

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-06-11

Input Type: Measured

Tester's full name: Ward Jenkins

Date of test: 06/11/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.9 grams
Mass of the pycnometer with water and aggregate (C)	969.1 grams
Mass of the pycnometer with water (B)	662.5 grams
Mass of the oven dried sample (before pycnometer) (A)	482.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.9 grams
Mass of the oven dry aggregate (for absorption) (A)	482.9 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.485
Bulk specific gravity (SSD Basis)	2.578
Apparent specific gravity	2.739
Absorption	3.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/11/2020 ✔