Summary for Test 2020-06-05-8-1
Test performed: ASTM F606-14aProject Information
| Project Identifiers | Project ID: 214015 DEA: 034H9504 EFIS: 0319000123 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/YOL-12,160-0-0.4/26.3-26.4, Var, various |
| Award Date | 03/01/2019 |
| Closeout Date | 05/23/2025 |
| Work Description | NOTE THIS EA HAS BEEN CLOSED. A NEW EA HAS BEEN OPENED TO COMPLETE THE WORK SEE EA 03-1N0104 FOR CONTINUED WORK ACTIVITIES. |
| Location Description | In Sacramento County at four bridges. |
| QA Service Level | 1 (Verified on 03/12/2019) |
Sample Information
| Sample Taken Date | 06/05/2020 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/08/2020 | Sample type | Quality Assurance |
| A brief description of the sample | 7/8 x 3 3/4 HDG A325 Bolts | The quantity of what the sample constitutes | 196 |
| From where was the sample collected | Distributor | First name of sampler or witnessed by | Joe |
| Last name of sampler or witnessed by | Lanz | Title of sampler | QA |
| Telephone number of sampler | 7072085241 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Bay Bolt | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 2980-03 |
|---|---|---|---|
| Heat Number(s) | 100799431 | Nut Mfg. Lot Number(s) | 31113-S-190518 |
| Washer Mfg. Lot Number(s) | 0619-188 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 3 3/4" | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 7/8" | Bolt Mfg. Lot Number | 431597A |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | BLUE DYE | |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-06-05-8
DIME Test ID: 2020-06-05-8-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2020-06-10
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 06/09/2020
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 3A | 431597A | 0.8750 | 67998 | 302.47 | 10.00 | A325 Bolt | fsaylor |
General comments (publicly viewable) (Max 1000 characters): A325 Bolt
Test Graph
Source: Bluehill Data Point FileTest was verified on 6/10/2020 ✔