Summary for Test 2020-03-11-25-3
Test performed: CTM 214-August 2010Project Information
| Project Identifiers | Project ID: 66666 DEA: APP EFIS: 0019000052 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 03/11/2020 | Sample Unique Key | 25 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/11/2020 | Sample type | Aggregate Prequalification Program |
| A brief description of the sample | 1-1/2" PCC | The quantity of what the sample constitutes | 12 bags |
| From where was the sample collected | Source | First name of sampler or witnessed by | Marc |
| Last name of sampler or witnessed by | Segura | Title of sampler | Technical Services Supervisor |
| Telephone number of sampler | (909) 436-8680 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Lytle Creek | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0040::LYTLE CREEK |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1-1/2 concrete aggregate | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 4419 | A detailed description of where the material sample was collected | Stockpile at the Plant |
| Where the material sample would have been placed if not sampled | Ready Mix Concrete | Primary Aggregate Nominal Size | 1-1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-03-11-25
DIME Test ID: 2020-03-11-25-3
Testing Lab: CEMEX - Central & Southern California
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2020-06-19
Test Results
What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Marc Segura
Date of test: 04/02/2020
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 7.9 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/19/2020 ✔