Summary for Test 2020-05-08-5-4
Test performed: ASTM A370-15Project Information
| Project Identifiers | Project ID: 213485 DEA: 032F9804 EFIS: 0312000026 |
|---|---|
| DIST-CO-RTE-PM | 03-COL-20-31.7/32.9 |
| Award Date | 10/15/2018 |
| Closeout Date | 05/11/2022 |
| Work Description | PAVEMENT REHABILITATION |
| Location Description | COLUSA COUNTY IN AND NEAR COLUSA FROM 0.1 MILE EAST OF THE MARKET STREET/STATE ROUTE 20 INTERSECTION TO 0.1 MILE SOUTH OF BUTTE VISTA DRIVE |
| QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
| Sample Taken Date | 05/08/2020 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/13/2020 | Sample type | Department Acceptance |
| A brief description of the sample | 2.25" x 4' 6" F1154 Gr 55 | The quantity of what the sample constitutes | 17 |
| From where was the sample collected | Source | First name of sampler or witnessed by | Armondo |
| Last name of sampler or witnessed by | Contreras | Title of sampler | QA |
| Telephone number of sampler | 949-517-8520 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | UIS | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | S60-001-20 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 1201012623 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | F1554 GR55 |
| Bolt Length(s) | 4' 6" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | Partial HDG |
| Diameter/Size | 2.25 | Bolt Mfg. Lot Number | 120101262320 |
| Rocap Test Requirement(s) | NO | Lubricant Requirements(s) | NO |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-05-08-5
DIME Test ID: 2020-05-08-5-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2020-05-13
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 05/13/2020
UTM: 67kip
Temperature: 72 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 1201012623 | 0.5 | 0.196 | 65015 | 93698 | 25.3 | fsaylor |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for the Sample
Test was verified on 5/13/2020 ✔