DIME - Test Summary

Summary for Test 2020-05-06-5-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214466 DEA: 081F1414 EFIS: 0815000231
DIST-CO-RTE-PM	08-RIV-15-15-54.2/54.3
Award Date	01/02/2020
Closeout Date	05/26/2022
Work Description	Slab & lane replacement with JPCP & precast conc pavement, place HMA.
Location Description	Riverside and San Diego County
QA Service Level	1 (Verified on 03/20/2020)

Sample Taken Date	05/06/2020	Sample Unique Key	5
Date that the sample was received by the laboratory/organization performing the testing	05/07/2020	Sample type	Verification
A brief description of the sample	3/4 HMA-A-SP R24 Aggregates and RAP	The quantity of what the sample constitutes	PSU 3 Bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	California Commercial Asphalt Lake Elsinore
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0214A-20
Linked DIME Sample ID		The fabricator/manufacturer/facility name	California Commercial Asphalt - Lake Elsinore
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0098, 91-33-0011
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R24	The fabricator/manufacturer designation for the sample	Unknown
The plant number	53417615	A detailed description of where the material sample was collected	Belt Cut at California Commercial Asphalt Lake Elsinore Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2020-05-06-5

DIME Test ID: 2020-05-06-5-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-05-13

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 05/12/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	969.5 grams
Mass of the pycnometer with water (B)	663.7 grams
Mass of the oven dried sample (before pycnometer) (A)	487.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	487.9 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.512
Bulk specific gravity (SSD Basis)	2.575
Apparent specific gravity	2.679
Absorption	2.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/13/2020 ✔