Summary for Test 2020-04-21-13-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 214106 DEA: 07310704 EFIS: 0715000004 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-118,405-R9.0/R9.9,46.7/46.9 |
| Award Date | 06/17/2019 |
| Closeout Date | 08/03/2023 |
| Work Description | PAVE GORES AND CONSTRUCT MAINTENANCE VEHICLE PULLOUTS. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES ON ROUTE 118 FROM WOODLEY AVENUE UNDERCROSSING TO 0.1 MILE EAST OF ROUTE 118/405 SEPARATION AND ON ROUTE 405 FROM 0.1 MILE SOUTH OF ROUTE 405/118 SEPARATION TO 0.1 MILE NORTH OF ROUTE 405/118 SEPARATION |
| QA Service Level | 1 (Verified on 03/06/2020) |
Sample Information
| Sample Taken Date | 04/21/2020 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/27/2020 |
| Sample type | Verification | A brief description of the sample | 3/4 WMA-A-SP R15 |
| The quantity of what the sample constitutes | JMF 12 bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Sun Valley | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0202A-20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0017, 91-19-0019, 91-19-0021 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 WMA-A-SP R15 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 220826 SVA SJR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-21-13
DIME Test ID: 2020-04-21-13-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-05-11
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Sebastian Ferrer, Satish Jain
Date of test: 05/01/2020
| Cumulative Percent Passing | ||||||
|---|---|---|---|---|---|---|
| % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 88 % | ||||||
| 73 % | ||||||
| 50 % | ||||||
| 34 % | ||||||
| 25 % | ||||||
| 17 % | ||||||
| 11 % | ||||||
| 7 % | ||||||
| 3.8 % | ||||||
General comments (publicly viewable) (Max 1000 characters): Virgin Aggregate Gradation
Test was verified on 5/11/2020 ✔