Summary for Test 2020-04-08-5-2
Test performed: AASHTO T27-14
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Project Information
| Project Identifiers | Project ID: 214424 DEA: 051F6304 EFIS: 0514000040 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-41-14.2/15.9 |
| Award Date | 12/12/2019 |
| Closeout Date | 09/23/2022 |
| Work Description | ROUTE 41 ATASCADERO ADA PROJECT; CONSTRUCT ADA PATHWAYS AND RAMPS, DRAINAGE SYSTEMS AND SIGNALS. |
| Location Description | SAN LUIS OBISPO COUNTY IN ATASCADERO FROM SAN GABRIEL ROAD TO ROUTE 101/41 SEPARATION |
| QA Service Level | 1 (Verified on 09/30/2019) |
Sample Information
| Sample Taken Date | 04/08/2020 | Sample Unique Key | 5 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/08/2020 |
| Sample type | Verification | A brief description of the sample | One JMF verification |
| The quantity of what the sample constitutes | 9 bags aggregate | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Ortega |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CalPortland Paso Robles | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-40-0013 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | At the plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-08-5
DIME Test ID: 2020-04-08-5-2
Testing Lab: CT D05 - San Luis Obispo District Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-04-24
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Daniel Gingras
Date of test: 04/15/2020
| Cumulative Percent Passing | ||||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 96.8 % | ||||||
| 75.6 % | ||||||
| 21.4 % | ||||||
| 9.6 % | ||||||
| 8.2 % | ||||||
| 5.4 % | ||||||
| 3.2 % | ||||||
| 1.8 % | ||||||
| 1.1 % | ||||||
| 0.7 % | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/24/2020 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.