Summary for Test 2020-04-02-2-2
Test performed: AASHTO T176-08Project Information
| Project Identifiers | Project ID: 212827 DEA: 07296404 EFIS: 0713000031 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5,10,60-16.1/17.0,18.1/18.4,0.4/R1.0 |
| Award Date | 01/18/2018 |
| Closeout Date | 09/03/2020 |
| Work Description | PLACE ROCK BLANKET, MINOR CONCRETE, AND WEED CONTROL MAT. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES ON ROUTE 5 FROM EUCLID AVENUE UNDERCROSSING TO SEVENTH STREET OVERCROSSING AND ON ROUTE 10 FROM LA RIVER TO ROUTE 5 AND ON ROUTE 60 FROM SOTO STREET UNDERCROSSING TO EAST OF EUCLID AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 06/14/2019) |
Sample Information
| Sample Taken Date | 04/02/2020 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/03/2020 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4 WMA-A-SP R15 |
| The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Sun Valley | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0183A-20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0017, 91-19-0019, 91-19-0021 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 WMA-A-SP R15 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 22086 SVA SJR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-02-2
DIME Test ID: 2020-04-02-2-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Test Release Date: 2020-05-07
Test Results
How many times will the test be run?: 3 Times
Input Type: Measured
Tester's full name: Michael Magana
Date of test: 04/08/2020
Clay Level (Test 1): 5.2
Sand Level (Test 1): 4.3
Clay Level (Test 2): 5.2
Sand Level (Test 2): 4.4
Clay Level (Test 3): 5.4
Sand Level (Test 3): 4.5
Sand Equivalent (Test 1): 83
Sand Equivalent (Test 2): 85
Sand Equivalent (Test 3): 84
Sand Equivalent: 84
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/7/2020 ✔