Summary for Test 2020-03-17-6-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 212501 DEA: 022E4804 EFIS: 0200000586 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96,263-103.1/103.6,56.8/57.2 |
| Award Date | 12/14/2018 |
| Closeout Date | 12/01/2021 |
| Work Description | BRIDGE REPLACEMENT |
| Location Description | SISKIYOU COUNTY ABOUT 8 MILES NORTH OF YREKA ON ROUTE 96 FROM 0.5 MILE WEST TO 0.2 MILE EAST OF ROUTE 263 AND ON ROUTE 263 FROM 0.3 MILE NORTH OF SHASTA RIVER BRIDGE #02-0014 TO ROUTE 96 |
| QA Service Level | 1 (Verified on 06/06/2017) |
Sample Information
| Sample Taken Date | 03/17/2020 | Sample Unique Key | 6 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/17/2020 | Sample type | Department Acceptance |
| A brief description of the sample | Coarse Aggregate (1 inch x No. 4) | The quantity of what the sample constitutes | Day's Concrete |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Chad |
| Last name of sampler or witnessed by | Ensminger | Title of sampler | ARE |
| Telephone number of sampler | Laboratory sample identification | D78356 | |
| Linked DIME Sample ID | 2020-03-17-7 | The fabricator/manufacturer/facility name | Mountain Ready Mix |
| Transportation Laboratory (TL) Number | 850987 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | Abt 8 | |
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-47-0014::MOORES GRAVEL |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Belt at Plant |
| Where the material sample would have been placed if not sampled | Abutment 8 | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | CT675S | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-03-17-6
DIME Test ID: 2020-03-17-6-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-04-06
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Karen Spliethof
Date of test: 03/18/2020
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 11632 grams | ||||||
| 0.0 grams | 100 % | |||||
| 454.0 grams | 96 % | |||||
| 2402.0 grams | 79 % | |||||
| 5915.0 grams | 49 % | |||||
| 8157.0 grams | 30 % | |||||
| 11238.0 grams | 3 % | |||||
| 11549.0 grams | 1 % | |||||
| 11632.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/6/2020 ✔
