Summary for Test 2019-12-12-8-6
Test performed: AASHTO T176-08Project Information
| Project Identifiers | Project ID: 213603 DEA: 07301504 EFIS: 0714000020 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-1,10-R34.6/35.2,R2.1/18.4 |
| Award Date | 11/19/2018 |
| Closeout Date | 01/18/2022 |
| Work Description | REPLACING CONCRETE AND AC PAVEMENT |
| Location Description | LOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION |
| QA Service Level | 1 (Verified on 07/26/2019) |
Sample Information
| Sample Taken Date | 12/12/2019 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/16/2019 |
| Sample type | Verification | A brief description of the sample | 1/2 RHMA-G-SP |
| The quantity of what the sample constitutes | PSUE 4 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Irwindale | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0721G-19 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Irwindale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035::FISH CANYON QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP | The fabricator/manufacturer designation for the sample | 326120A IRW LTR |
| The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Vulcan Irwindale Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-12-12-8
DIME Test ID: 2019-12-12-8-6
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Test Release Date: 2020-03-17
Test Results
How many times will the test be run?: 3 Times
Input Type: Measured
Tester's full name: Satish Jain
Date of test: 12/19/2019
Clay Level (Test 1): 7.6
Sand Level (Test 1): 3.5
Clay Level (Test 2): 7.5
Sand Level (Test 2): 3.5
Clay Level (Test 3): 7.8
Sand Level (Test 3): 3.6
Sand Equivalent (Test 1): 47
Sand Equivalent (Test 2): 47
Sand Equivalent (Test 3): 47
Sand Equivalent: 47
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/17/2020 ✔