Summary for Test 2019-11-06-15-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 212244 DEA: 044G8404 EFIS: 0413000051 |
|---|---|
| DIST-CO-RTE-PM | 04-NAP-128-20.1/20.4 |
| Award Date | 02/19/2019 |
| Closeout Date | 06/27/2023 |
| Work Description | REPLACE CAPELL CREEK BRIDGE |
| Location Description | NAPA COUNTY ABOUT 15 MILES EAST OF RUTHERFORD FROM 1.1 MILES EAST OF KNOXVILLE ROAD TO 0.3 MILE WEST OF CAPELL VALLEY CREST |
| QA Service Level | 1 (Verified on 05/20/2017) |
Sample Information
| Sample Taken Date | 11/06/2019 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/13/2019 |
| Sample type | Annual Source Testing | A brief description of the sample | 1 x #4 Aggregates |
| The quantity of what the sample constitutes | 10 Bags | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Zantino | Last name of sampler or witnessed by | Ochoa |
| Title of sampler | Caltrans Consultant | Telephone number of sampler | 510-472-7109 |
| Laboratory sample identification | Con_19_789 | Linked DIME Sample ID | NA |
| The fabricator/manufacturer/facility name | Granite Capay | Transportation Laboratory (TL) Number | C859592 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | 28-Napa |
| Structure name | NA | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-57-0014::CAPAY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 2020 PCC Source Testing | The fabricator/manufacturer designation for the sample | NA |
| The plant number | NA | A detailed description of where the material sample was collected | Stockpile @ Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | NA | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-11-06-15
DIME Test ID: 2019-11-06-15-1
Testing Lab: CT D04 - Concord Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2019-12-20
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Zantino Ochoa
Date of test: 12/04/2019
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 15100 grams | ||||||
| 0.0 grams | 100 % | |||||
| 30.0 grams | 100 % | |||||
| 2220.0 grams | 85 % | |||||
| 10145.0 grams | 33 % | |||||
| 13520.0 grams | 10 % | |||||
| 14890.0 grams | 1 % | |||||
| 14960.0 grams | 1 % | |||||
| 15100.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/20/2019 ✔