Summary for Test 2019-12-04-1-1
Test performed: ASTM F606-14aProject Information
| Project Identifiers | Project ID: 213702 DEA: 041G4304 EFIS: 0412000126 |
|---|---|
| DIST-CO-RTE-PM | 04-NAP-128-R7.4 |
| Award Date | 03/29/2019 |
| Closeout Date | 12/08/2022 |
| Work Description | REPLACE BRIDGE, HMA PAVING, DRAINAGE AND RSP |
| Location Description | NAPA COUNTY NEAR SAINT HELENA AT CONN CREEK |
| QA Service Level | 1 (Verified on 07/29/2019) |
Sample Information
| Sample Taken Date | 12/04/2019 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/09/2019 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2" x 3.5" F3125 A325 HS Bolts |
| The quantity of what the sample constitutes | 33 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Muser |
| Title of sampler | QA | Telephone number of sampler | 9165170532 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | UIS | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S19-410-19 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 100786902 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | F3125 A325 |
| Bolt Length(s) | 3.5" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | HDG |
| Diameter/Size | 1/2" | Bolt Mfg. Lot Number | G9426 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | Yes | |
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-12-04-1
DIME Test ID: 2019-12-04-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2019-12-11
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 12/10/2019
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | G9426 | 0.5000 | 20661 | 91.9 | 10.00 | A325 Wedge Tensile | spaine |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 12/11/2019 ✔