Summary for Test 2019-10-25-21-9
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 10/25/2019 | Sample Unique Key | 21 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/01/2019 |
| Sample type | Verification | A brief description of the sample | 3/4" Combined Aggregate |
| The quantity of what the sample constitutes | JMF Prequalification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cody | Last name of sampler or witnessed by | Brown |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 19-263 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Syar Indunsties Lake Herman Batch | Transportation Laboratory (TL) Number | 911405 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-48-0002::LAKE HERMAN QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Batch Plant Hot Bins |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-10-25-21
DIME Test ID: 2019-10-25-21-9
Testing Lab: CT D01 - District 1 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-12-04
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Leif Ayres
Date of test: 12/04/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98.1 %
Cumulative percent passing the 1/2 in. sieve: 79.4 %
Cumulative percent passing the 3/8 in. sieve: 68 %
Cumulative percent passing the 1/4 in. sieve: 50 %
Cumulative percent passing the #4 sieve: 50 %
Cumulative percent passing the #8 sieve: 32.6 %
Cumulative percent passing the #16 sieve: 19.5 %
Cumulative percent passing the #30 sieve: 11.6 %
Cumulative percent passing the #50 sieve: 7.2 %
Cumulative percent passing the #100 sieve: 4.7 %
Cumulative percent passing the #200 sieve: 3.3 %
General comments (publicly viewable) (Max 1000 characters): Combined Grading from 4 hot bins and mineral filler
Test was verified on 12/4/2019 ✔