Summary for Test 2019-11-25-32-1
Test performed: ASTM A370-15Project Information
| Project Identifiers | Project ID: 213520 DEA: 120M9004 EFIS: 1213000017 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-22-R5.6/R10.9 |
| Award Date | 12/13/2018 |
| Closeout Date | 09/08/2022 |
| Work Description | RECHANNELIZE TO ENHANCE TRAFFIC FLOW |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF BROOKHURST STREET UNDERCROSSING IN GARDEN GROVE TO BEDFORD ROAD OVERCROSSING IN ORANGE |
| QA Service Level | 1 (Verified on 09/10/2018) |
Sample Information
| Sample Taken Date | 11/25/2019 | Sample Unique Key | 32 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/03/2019 | Sample type | Quality Assurance |
| A brief description of the sample | Coupon Castings | The quantity of what the sample constitutes | 4 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Debbie |
| Last name of sampler or witnessed by | Ozuna | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | DSI | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | J169 J249 |
|---|---|---|---|
| Part Number (s) | 68 12 216 246 | Material Specification | A536 |
| Grades | 65-45-12 | Metal Foundry Manufacturer (Mill) | DSI |
| Prestressing Manufacturer | Farrar |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-11-25-32
DIME Test ID: 2019-11-25-32-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2019-12-05
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: spaine
Date of test: 12/04/2019
UTM: 67kip
Temperature: 72 F
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | J169 | 0.502 | 0.19792 | 48035 | 76587 | 19.6 | spaine | |
| 2 | J169 | 0.502 | 0.19792 | 48588 | 77076 | 17 | spaine | |
| 3 | J249 | 0.502 | 0.19792 | 48826 | 77082 | 15.4 | spaine | |
| 4 | J249 | 0.502 | 0.19792 | 49127 | 78175 | 17.7 | spaine |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 12/5/2019 ✔