Summary for Test 2019-11-07-1-3
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 213520 DEA: 120M9004 EFIS: 1213000017 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-22-R5.6/R10.9 |
| Award Date | 12/13/2018 |
| Closeout Date | 09/08/2022 |
| Work Description | RECHANNELIZE TO ENHANCE TRAFFIC FLOW |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF BROOKHURST STREET UNDERCROSSING IN GARDEN GROVE TO BEDFORD ROAD OVERCROSSING IN ORANGE |
| QA Service Level | 1 (Verified on 09/10/2018) |
Sample Information
| Sample Taken Date | 11/07/2019 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/11/2019 | Sample type | Quality Assurance |
| A brief description of the sample | #14 Twist Grip couplers | The quantity of what the sample constitutes | 70 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Steve |
| Last name of sampler or witnessed by | Hall | Title of sampler | CALTRANS METS QA INSPECTOR |
| Telephone number of sampler | 6466327821 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Martinez steel | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L134-139-19 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Nucor and Gerdau |
| Coupler Manufacturer | BarSplice | Intermediate Assembler or Fabricator | Martinez Steel Corporation |
| Rebar Size | 14 | Coupler Model | Barsplice Taper Grip-Twist |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Unknown | Rebar Hoop Fabricator | Unknown |
| Coupler Component Heat/Lot Number(s) | A191470 A192437 | Rebar Heat Number(s) | SE16105426 6502547702 |
| Rebar Size 2 | Coupler Unique ID | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-11-07-1
DIME Test ID: 2019-11-07-1-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2019-11-15
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 11/15/2019
UTM: 2000kip
Temperature: 72.00 f
Halo ID:
| Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | No. 14/43mm | 1 | 0 | 2.25 | 209459 | 93093 | OK Necking | fsaylor |
General comments (publicly viewable) (Max 1000 characters): OK Necking
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 11/15/2019 ✔