Summary for Test 2019-09-19-5-4
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 213945 DEA: 060U1604 EFIS: 0615000310 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE-41-R22.0/R22.6 |
| Award Date | 04/05/2019 |
| Closeout Date | 10/15/2020 |
| Work Description | FURNISH & PLACE POLYESTER CONCRETE OVERLAY & PLACE JOINT SEAL. |
| Location Description | FRESNO COUNTY IN FRESNO FROM 0.2 MILE NORTH OF ROUTE 41/99 SEPARATION TO 0.1 MILE SOUTH OF VAN NESS AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 04/11/2019) |
Sample Information
| Sample Taken Date | 09/19/2019 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/19/2019 | Sample type | Quality Control |
| A brief description of the sample | 1 gallon can | The quantity of what the sample constitutes | 2 tankers |
| From where was the sample collected | Source | First name of sampler or witnessed by | Daniel |
| Last name of sampler or witnessed by | Tikusis | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Kwik Bond Polymers and Reichhold | |
| Transportation Laboratory (TL) Number | Sacramento Caltrans lab | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1206047 |
|---|---|---|---|
| Batch Number | 1206047 | Mix number | 1206047 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-09-19-5
DIME Test ID: 2019-09-19-5-4
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2019-09-27
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Larry McCrum
Date of test: 09/27/2019
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.486 in
Sample 1 Thickness: 0.245 in
Sample 1 Area: 0.1191 in^2
Sample 1 Ultimate Strength Actual: 435 lbs
Sample 1 percent elongation: 67 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.24 in
Sample 2 Area: 0.1166 in^2
Sample 2 Ultimate Strength Actual: 408 lbs
Sample 2 percent elongation: 63 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.487 in
Sample 3 Thickness: 0.237 in
Sample 3 Area: 0.1154 in^2
Sample 3 Ultimate Strength Actual: 405 lbs
Sample 3 percent elongation: 64 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.486 in
Sample 4 Thickness: 0.251 in
Sample 4 Area: 0.122 in^2
Sample 4 Ultimate Strength Actual: 407 lbs
Sample 4 percent elongation: 56 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.485 in
Sample 5 Thickness: 0.24 in
Sample 5 Area: 0.1164 in^2
Sample 5 Ultimate Strength Actual: 418 lbs
Sample 5 percent elongation: 66 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.486 in
Sample 6 Thickness: 0.24 in
Sample 6 Area: 0.1166 in^2
Sample 6 Ultimate Strength Actual: 418 lbs
Sample 6 percent elongation: 65 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3652.4 psi
Sample 2 Ultimate strength : 3499.1 psi
Sample 3 Ultimate strength: 3509.5 psi
Sample 4 Ultimate strength: 3336.1 psi
Sample 5 Ultimate strength: 3591.1 psi
Sample 6 Ultimate strength : 3584.9 psi
Ultimate Strength Average: 3529 psi
Percent Elongation Average: 64 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/27/2019 ✔