Summary for Test 2019-04-15-14-1
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 213050 DEA: 051J5204 EFIS: 0517000195 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-58-6.9/30.0 |
| Award Date | 03/19/2018 |
| Closeout Date | 12/30/2019 |
| Work Description | COLD PLANE EXISTING ROADWAY AND RESURFACE WITH RHMA-G. |
| Location Description | SAN LUIS OBISPO COUNTY ABOUT 6 MILES EAST OF SANTA MARGARITA FROM ROUTE 229 TO NAVAJO CREEK BRIDGE |
| QA Service Level | 1 (Verified on 09/06/2019) |
Sample Information
| Sample Taken Date | 04/15/2019 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2019 |
| Sample type | Dispute Resolution | A brief description of the sample | 3/4 inch RHMA-G |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Source |
| First name of sampler or witnessed by | B | Last name of sampler or witnessed by | Barber |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Papich Construction | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 2 |
| Sublot number | 3 | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2019-04-15-14
DIME Test ID: 2019-04-15-14-1
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2019-12-17
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Gurpartap Grewal
Date of test: 04/16/2019
Mass of the dry specimen in air: 4487.8 g
Mass of the dry specimen plus paraffin coating in air: 4530.4 g
Mass of the dry specimen plus paraffin coating in water: 2536.7 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4490.4 g
Mass 2 of the dry specimen plus paraffin coating in air: 4533.0 g
Mass 2 of the dry specimen plus paraffin coating in water: 2536.5 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4503.5 g
Mass 3 of the dry specimen plus paraffin coating in air: 4547.1 g
Mass 3 of the dry specimen plus paraffin coating in water: 2554.1 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.306
Bulk Specific Gravity 2: 2.304
Bulk Specific Gravity 3: 2.316
Average Bulk Specific Gravity: 2.309
General comments (publicly viewable) (Max 1000 characters): Caltrans Internal Lab no. 019-004
Lab No. 18-A-465
Lot2 Sublot3
Test was verified on 12/17/2019 ✔
