DIME - Test Summary

Summary for Test 2019-08-12-9-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214006 DEA: 09373704 EFIS: 0918000004
DIST-CO-RTE-PM	09-KER-178,395-75.0/81.0,R23.4/29.5
Award Date	04/19/2019
Closeout Date	01/06/2020
Work Description	PLACE HMA (TYPE A) AND RHMA-G.
Location Description	KERN COUNTY ABOUT 11 MILES WEST OF INYOKERN ON ROUTE 178 FROM 2.0 MILES WEST TO 4.0 MILES EAST OF CANE BRAKE CREEK BRIDGE AND NEAR INYOKERN ON ROUTE 395 FROM 5.8 MILES NORTH TO 0.3 MILE SOUTH OF ROUTE 178/395 SEPARATION
QA Service Level	NOT VERIFIED

Sample Taken Date	08/12/2019	Sample Unique Key	9
Date that the sample was received by the laboratory/organization performing the testing	08/13/2019	Sample type	Verification
A brief description of the sample	1/2 HMA-A-SP R25	The quantity of what the sample constitutes	PSE 11 bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Blue Diamond Materials Victorville
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0483A-19
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Agcon Inc Oro Grande, Cemex White Mountain
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0106, 91-36-0046
The fabricator's/manufacturer's product name for the sample	1/2 HMA-A-SP R25	The fabricator/manufacturer designation for the sample	300215 R25
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-08-12-9

DIME Test ID: 2019-08-12-9-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-08-22

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 08/16/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	964.5 grams
Mass of the pycnometer with water (B)	654.3 grams
Mass of the oven dried sample (before pycnometer) (A)	491.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	491.4 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.589
Bulk specific gravity (SSD Basis)	2.634
Apparent specific gravity	2.712
Absorption	1.8 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/22/2019 ✔