Summary for Test 2019-07-26-8-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 214006 DEA: 09373704 EFIS: 0918000004 |
---|---|
DIST-CO-RTE-PM | 09-KER-178,395-75.0/81.0,R23.4/29.5 |
Award Date | 04/19/2019 |
Closeout Date | 01/06/2020 |
Work Description | PLACE HMA (TYPE A) AND RHMA-G. |
Location Description | KERN COUNTY ABOUT 11 MILES WEST OF INYOKERN ON ROUTE 178 FROM 2.0 MILES WEST TO 4.0 MILES EAST OF CANE BRAKE CREEK BRIDGE AND NEAR INYOKERN ON ROUTE 395 FROM 5.8 MILES NORTH TO 0.3 MILE SOUTH OF ROUTE 178/395 SEPARATION |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 07/26/2019 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/30/2019 |
Sample type | Verification | A brief description of the sample | 1/2 RHMA-G-SP 1 LSM |
The quantity of what the sample constitutes | PSE 9 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Blue Diamond Materials Victorville | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0449G-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Oro Grande, White Mountain | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0046, 91-36-0106 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP 1 LSM | The fabricator/manufacturer designation for the sample | 300191 - LSM |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Victorville Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-07-26-8
DIME Test ID: 2019-07-26-8-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2019-08-22
Test Results
Input Type: Measured
Tester's full name: Nader Rashidi
Date of test: 08/02/2019
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 963.8 grams
Mass of the pycnometer with water (B): 653.5 grams
Mass of the oven dried sample (before pycnometer) (A): 490.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 490.7 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.587
Bulk specific gravity (SSD Basis): 2.636
Apparent specific gravity: 2.720
Absorption: 1.9 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/22/2019 ✔