Summary for Test 2019-07-15-18-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 213877 DEA: 060X8904 EFIS: 0618000179 |
|---|---|
| DIST-CO-RTE-PM | 06-KIN-41-0.0/11.5 |
| Award Date | 03/15/2019 |
| Closeout Date | 04/16/2021 |
| Work Description | COLD PLANE AC PAVEMENT AND PLACE RHMA TYPE G. |
| Location Description | KINGS COUNTY ABOUT 6.5 MILES SOUTH OF KETTLEMAN CITY FROM KERN COUNTY LINE TO 0.1 MILE SOUTH OF UTICA AVENUE |
| QA Service Level | 1 (Verified on 04/11/2019) |
Sample Information
| Sample Taken Date | 07/15/2019 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/26/2019 |
| Sample type | Quality Assurance | A brief description of the sample | sublot 10 |
| The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Other |
| First name of sampler or witnessed by | na | Last name of sampler or witnessed by | na |
| Title of sampler | na | Telephone number of sampler | |
| Laboratory sample identification | 19-RHMA-0122 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | sample from plant | Transportation Laboratory (TL) Number | C816176-10 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SPM Avenal CA |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | 10 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-07-15-18
DIME Test ID: 2019-07-15-18-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-08-01
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: PM/RK/JH
Date of test: 07/31/2019
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 2627.7 grams | ||||||
| grams | % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 57.9 grams | 97.8 % | |||||
| 500.2 grams | 81 % | |||||
| 0 grams | 100 % | |||||
| 1644.9 grams | 37.4 % | |||||
| 469.2 grams | 19.5 % | |||||
| 695.0 grams | 10.9 % | |||||
| 813.5 grams | 6.4 % | |||||
| 885.6 grams | 3.7 % | |||||
| 924.8 grams | 2.2 % | |||||
| 952.6 grams | 1.12 % | |||||
| grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/1/2019 ✔
