DIME - Test Summary

Summary for Test 2019-07-09-7-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213647 DEA: 080N9724 EFIS: 0815000102
DIST-CO-RTE-PM	08-SBD-395-35.5/39.1
Award Date	12/03/2018
Closeout Date	12/02/2019
Work Description	CONSTRUCT MEDIAN AND WIDENING SHOULDER
Location Description	SAN BERNARDINO COUNTY NEAR ADELANTO FROM 1.3 MILES SOUTH TO 2.3 MILES NORTH OF KRAMER ROAD
QA Service Level	1 (Verified on 03/05/2019)

Sample Taken Date	07/09/2019	Sample Unique Key	7
Date that the sample was received by the laboratory/organization performing the testing	07/10/2019	Sample type	Verification
A brief description of the sample	1/2 HMA-A-SP R15	The quantity of what the sample constitutes	PSE 14 bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	A S
Last name of sampler or witnessed by	SAMANO MAQUIBAN	Title of sampler
Telephone number of sampler		Laboratory sample identification	0410A-19
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Agcon Inc Oro Grande, Cemex White Mountain
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0046, 91-36-0106
The fabricator's/manufacturer's product name for the sample	1/2 HMA-A-SP R15	The fabricator/manufacturer designation for the sample	300215
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-07-09-7

DIME Test ID: 2019-07-09-7-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-08-22

Input Type: Measured

Tester's full name: Nader Rashidi

Date of test: 07/16/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	965.0 grams
Mass of the pycnometer with water (B)	655.0 grams
Mass of the oven dried sample (before pycnometer) (A)	491.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	491.6 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.587
Bulk specific gravity (SSD Basis)	2.632
Apparent specific gravity	2.707
Absorption	1.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/22/2019 ✔