Summary for Test 2014-07-22-6451379-3
Test performed: ASTM C136-06Project Information
| Project Identifiers | Project ID: 209175 DEA: 030F2204 EFIS: 0300000072 |
|---|---|
| DIST-CO-RTE-PM | 03-ED-50-R30.7/R31.7 |
| Award Date | 02/25/2014 |
| Closeout Date | 07/30/2015 |
| Work Description | REPLACE BRIDGE. |
| Location Description | SLY PARK UNDERCROSSING |
| QA Service Level | 1 (Verified on 11/01/2013) |
Sample Information
| Sample Taken Date | 07/22/2014 | Sample Unique Key | 6451379 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/22/2014 |
| Sample type | Quality Control | A brief description of the sample | Backwall 1 Aggregate |
| The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Source |
| First name of sampler or witnessed by | Andrew | Last name of sampler or witnessed by | Santos |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | Not set | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Folsom Ready Mix | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Folsom Ready Mix Stockpile |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | Folsom Ready Mix Stockpile |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2014-07-22-6451379
DIME Test ID: 2014-07-22-6451379-3
Testing Lab: Viking Construction Company, Incorporated - Rancho Cordova
Test Method: ASTM C136-06: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2014-07-24
Test Results
What type of gradation is being tested?: Combined Gradation
Input Type: Calculated
Tester's full name: Andrew Santos
Date of test: 07/22/2014
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 99 %
Cumulative percent passing the 3/4 in. sieve: 87 %
Cumulative percent passing the 1/2 in. sieve: 54 %
Cumulative percent passing the 3/8 in. sieve: 46 %
Cumulative percent passing the #4 sieve: 42 %
Cumulative percent passing the #8 sieve: 35 %
Cumulative percent passing the #16 sieve: 27 %
Cumulative percent passing the #30 sieve: 15 %
Cumulative percent passing the #50 sieve: 5 %
Cumulative percent passing the #100 sieve: 2 %
Cumulative percent passing the #200 sieve: 1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/24/2014 ✔